Record Setup
Record Setup - Schedule Setup
1.CHANNEL - Select a single channel to setup the schedule.
2.TYPE - Select a recording mode:
•Continuous Recording: Recording is constantly occurring.
•Motion: Begins the recording when motion is detected.
•Alarm: Begins the recording when an alarm is detected
• Motion and Alarm: Sets the system to record when Motion and/or an Alarm is detected.
3.0~24 Hour - Activate or deactivate the schedule for a particular hour in a week.
4.SUN~SAT - Activate or deactivate the scheduled hours in a day. All hours in the day can be activated or deactivated by double clicking on the name of the day (i.e. Mon., Tue etc.).
NOTE: If the DVR is set to MOTION RECORDING and the DVR keeps recording continuously or is not triggered to record as expected, please check the sensitivity settings and the motion mask setup in
CONFIGURATION>MOTION SETUP.
If the motion settings are too sensitive, you may want to lower the sensitivity level and define a motion detection area for more accuracy. If the motion is not triggered as expected, you may want to increase the sensitivity level, clear the motion mask, or enlarge the detection area.
35
