|
|
|
|
|
|
|
|
| STEP 2 - SET UP LOCAL VIEWING ON YOUR PC |
|
|
| THIS STEP RELATES TO REMOTE VIEWING OVER THE LAN (LOCAL AREA NETWORK) | |
|
|
| BY USING A PC LOCATED ON THE SAME NETWORK AS THAT OF THE SYSTEM. | |
|
|
|
|
|
|
|
|
| RETRIEVE SYSTEM INFORMATION: |
|
| 1 | ||
|
| |||
| 1. Access the Main Menu Setup screens, and navigate to the MAIN | |||
|
|
|
| MENU - EXTERNAL DEVICE - TCP/IP SETUP - IP SETUP option. |
|
|
|
| 2. Record the MAC Address of your system. This information is NECESSARY |
|
|
|
| for the DDNS Setup process. |
|
|
|
| 3. Confirm that the DHCP MODE is set to AUTOMATIC. This will allow your |
|
|
|
| system to lease an IP ADDRESS from your router. If the system is not set to |
|
|
|
| AUTOMATIC, change the setting in the DHCP SETUP menu and click |
|
|
|
| DETECT IP. |
|
|
|
| 4. The IP PORT is 50000 by default. |
IP ADDRESS: |
| . |
| . |
MAC ADDRESS:
(Required for DDNS registration)
RECORD THE IP AND MAC ADDRESSES IN THE SECTION BELOW:
.
NOTE: The system will lease networking information from your Router. If you wish to set your information manually, then set the DHCP MODE to MANUAL. Please consult your Hardware Manual for further Menu options.
2 | INSTALL SOFTWARE: |
(on your local computer for local viewing) |
Insert the LOREX CLIENT 2.2 SOFTWARE CD into your local computer’s CD ROM drive and proceed with the installation.
For Lorex Client Software requirements, please refer to the Software User Manual.
3 |
|
|
| LOREX CLIENT 2.2 SOFTWARE: |
|
|
| ||||
| 1 |
|
|
|
| ||||||
|
| (on your local computer for local viewing) |
|
|
| ||||||
|
|
|
| Follow the installation screens to complete Lorex Client 2.2 |
| ||||||
|
|
|
| Software installation. |
|
|
|
|
| ||
|
|
|
| 2 |
|
| 3 |
| 4 |
| 5 |
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
4 | LOREX CLIENT 2.2 SOFTWARE: |
(on your local computer for local viewing) |
Close the CD Menu Screen. A Lorex Client Icon will appear on your desktop.
RUN THE LOREX CLIENT 2.2 SOFTWARE:
(on your local computer)
L15LD420/L17LD420 Series Quick
