LOREX Technology LW2002 Series quick start Allows for several different mounting options

PORTABLE COLOR LCD DIGITAL WIRELESS MONITORING SYSTEM

LW2002 Series - quick start guide

The LW2002 series product is expandable up to 4 cameras.

To order additional cameras LW2002WAC1

Series (white) or LW2002BAC1 Series (black), please visit our website at www.lorexcctv.com

Time	Tools		Skills - Easy
Under 15 Minutes*
			Plug & Play connections,
		Hand Tools
				e sy
* Installation time may vary based on			On screen set up
application and camera location

Getting Started

The Digital Wireless Surveillance System comes with the following components:

A. Installing the Camera

1	Camera Positioning: The Camera can be placed on
	a flat surface, or wall mounted. The versatile stand

allows for several different mounting options.

NOTE: AVOID INSTALLING IN A LOCATION WHICH REQUIRES THE WIRELESS SIGNAL TO PASS THROUGH CEMENT, CONCRETE AND METAL STRUCTURES. THIS

WILL REDUCE THE

TRANSMISSION RANGE.

2	Connect the Power Adaptor to the 9V
	Input on the back of the camera.

NOTE: See Page 2 for battery operation instructions.

NOTE: Before you install a camera, carefully plan where and how it will be positioned, and where you will route the cable that connects the camera to the power adaptor. Before starting permanent installation, verify its performance by observing the image on a monitor when the camera is positioned where it will be permanently installed.

Wireless cameras require a power source (either an electrical outlet or battery power) to operate.

When adding cameras that were not included in the original box, you will need to pair up the camera with the receiver. Please refer to

1 x Wireless Receiver

1 x Receiver Cradle

1 x Wireless Camera(s)*

1 x Power Adaptor (for receiver)

1 x Power Adaptor (for camera)*

1 x RCA Audio/Video Cable Instruction Manual

Quick Start Guide

*Number of cameras and power adaptors may vary by model. Check your package for specific content information.

Desk/Counter MountWall Mount

	Wall Mounting: Mark the position of
OPTIONAL
	the screw holes on the wall.

•Drill holes and insert 2 screws.

•Firmly attach the camera to the wall by placing the stand over the installed screws and pushing the base downwards to secure.

Position the Base holes over the screws. Slide the base downwards.

3	Set the alarm sensitivity on the camera.
	Turn the wheel on the side of the camera

all the way down to decrease sound sensitivity. This means that the alarm is only triggered by loud noises. Turning the wheel the other way will result in the opposite. See the User’s Manual for complete details on the alarm function.

the Camera Pairing Section of the User Manual.

Night Vision : The camera has built-in IR LEDs, which provides the camera with the ability to view images in no/low light conditions. It is important to use the provided power adaptor (and not batteries) when using the camera for prolonged periods in low light conditions, as the built-in IR LEDs will drain the battery more

quickly than during regular daytime use.

B. Connect the Receiver Determine if you will be using the Receiver Cradle, or connecting the cables directly to the receiver before installation.

3 Turn on Monitor or TV, and switch to

1	Place the Receiver Cradle
	or Receiver in a location

that offers clear reception with your camera(s).

2	Plug the AC adaptor power output cable into the
	9V POWER input of the Cradle or directly into the

Receiver. Plug the power plug into a wall outlet or surge protector.

NOTE: Leave the receiver to charge for 4 hours prior to first time use so the built-in rechargeable receiver battery is fully charged. DO NOT remove the power cable from the receiver / from the cradle during initial charging process. After initial charge, charge as required.

Once the Receiver is fully charged the LED light above the DC 9V input on the receiver will turn from RED to GREEN.

	View your Receiver images on any Monitor or TV
OPTIONAL
	with RCA inputs (note that this requires the receiver
	to be connected to AC power, not battery power).

1		Connect one end (black connector	1
		plug) of the RCA Audio/ Video
		Cable to the Receiver or Receiver
		Cradle.
2	Connect the other ends (Audio		2
	- white plug, Video - Yellow plug)

of the RCA cable to your Monitor or TV.

NOTE: The receiver monitor turns off when it is connected to a Monitor or TV.

the video channel that the receiver has

been connected to.

Tip 1: If your TV has a PIP feature, you

can have the camera images displayed in

the PIP window. Check your TV manual

for info on PIP feature (if available).

Tip 2: Connect to RCA input on a VCR, DVD recorder or Surveillance DVR to record video from the LW2002 system.

NOTE: The purpose of the AV output is for convenience only. When using with large screen TV/Monitor, the picture might be grainy as the camera limits video resolution to VGA (640x480 pixels). This is not a product defect. For best performance use with TV/Monitor PIP (Picture in Picture) function. Check your TV/Monitor product manual to see if this feature is available on your TV/Monitor. This allows you to view TV or other video source and see video from the camera in a small window on the same screen.

www.lorexcctv.com LW2002 Series Quick Start Guide_R2 Page