Others

Troubleshooting

If you put the menu back to the settings at the time of purchase, the conditions may be improved. Carry out the [RESET] in the setup menu. (P22)

Conditions

Causes

The camera will not turn

Is the battery inserted correctly?

on.

 

Is the battery sufficiently charged?

 

Use a battery that has been sufficiently charged.

 

 

As the camera is turned

Is the battery charge insufficient to operate the camera?

on, it turns off

Use a battery that has been sufficiently charged.

immediately.

 

 

 

The brightness of the

This phenomenon appears when pressing the shutter button

screen becomes dark or

halfway to set the aperture value and does not affect the

bright for a moment.

recorded pictures.

 

 

The picture cannot be

Is the card inserted?

recorded.

 

Is the mode dial correctly set?

 

 

 

Is there any memory capacity left on the card?

 

Before recording, delete some pictures.

 

 

The picture is not

Does the picture appear on the Viewfinder?

displayed on the LCD

Press the [EVF/LCD] button to switch to LCD monitor display.

monitor.

 

 

 

The screen is too bright

Adjust the brightness of the screen.

or dark.

 

 

 

Flash is not activated.

Is the flash closed?

 

Press the [ OPEN] button to open the flash.

Unreadable language Select [ ] icon on the [SETUP] menu to set the desired was selected by mistake. language.

The subject is not

The focus range varies depending on the recording mode.

focused properly.

Rotate the mode dial to set to the proper mode for the

 

distance to the subject.

 

 

 

 

Is the subject out of the focus range? (P32)

 

 

 

When you cannot focus on the subject even if you tried many

 

times, turn the camera off once and turn it on again.

 

 

 

The picture is not played

Is the card inserted?

 

back.

 

 

Is there a picture in the card?

 

 

 

 

 

Is the mode dial set to playback [

]?

 

 

The picture does not

Is the camera connected to the TV correctly?

appear on the television. Check it.

 

 

 

 

 

Set the TV to video input mode.

 

110

Page 110
Image 110
Panasonic DMC-FZ20GN operating instructions Troubleshooting