Preparation
∫ Temporarily storing the lens hood
2 Attach the lens cap.
1 Remove the lens hood, reverse it and then attach it again.
1 Place the camera upside down.
2 Catch the hook on the lens hood adaptor.
3 Push the lens hood.
4Align the marks as illustrated.
5 Tighten the screw.
12
43
5
•Check if the screw is loose and then attach the lens hood.
•Do not tighten the screw too much.
•Do not take a picture while the lens hood is temporarily stored.
•Ensure that the lens cap is firmly attached.
•When taking pictures with flash with the lens hood attached, the lower portion of the photo may turn dark (vignetting effect) and the control of the flash may be disabled because the photo flash may be obscured by the lens hood. We recommend detaching the lens hood.
•When using the AF assist lamp in the dark, detach the lens hood.
•For details on how to attach the MC protector and the ND filter, refer to P102.
•Consult the dealer or your nearest servicentre if you lose the supplied accessories. (You can purchase the accessories separately.)
19
