Others

Using the MC Protector/ND Filter

The MC protector (DMW-LMC72; optional) is a transparent filter which affects neither the colours nor the amount of light, so it can always be used to protect the camera’s lens.

The ND filter (DMW-LND72; optional) reduces the amount of light to approximately 1/8th (equal to adjusting the aperture value 3 increments) without affecting the colour balance.

1 Remove the lens cap and the lens ring.

3 Attach the MC protector A or the ND filter B.

2 Attach the lens hood adaptor.

(P18)

Cap C (supplied with MC protector)

The lens cap supplied with the camera cannot be attached to the MC protector or the ND filter.

You cannot attach the MC protector and the ND filter at the same time.

When taking pictures with the flash using the MC protector or ND filter, vignetting effect may occur.

If the MC protector/ND filter are dropped, they may be destroyed. Be careful not to drop them when attaching them to the camera.

The cap supplied with MC protector can also be used for the ND filter.

MCu“Multi-coated” NDu“Neutral Density”

102

Page 102
Image 102
Panasonic DMC-FZ20GN operating instructions Using the MC Protector/ND Filter, MCuMulti-coated NDuNeutral Density