Panasonic DMC-FZ20GN operating instructions Connecting to a PC

Models: DMC-FZ20GN

1 116
Download 116 pages 26.97 Kb
Page 96
Image 96

Connecting to a PC or Printer

Connecting to a PC

If you use Windows 98/98SE, install the USB driver and then connect it to the computer.

When using Windows Me/2000/XP, Mac OS 9.x and Mac OS X, you do not have to install the USB driver.

1 Turn the camera on and set the [USB MODE] according to the OS you use.

Set to [PC] or [PictBridge (PTP)]. Refer to “Before Connecting with USB Connection Cable” on page 94.

If [USB MODE] is set to [PictBridge (PTP)] while Windows XP or Mac OS X is used, it is connected as PTP.

2 Connect the camera to a PC via the USB connection cable A (supplied).

Connect the USB connection cable with the [ ] mark facing you.

Hold C and then insert or pull the USB connection cable straight.

Depending on the USB mode setting, the indications on the screen may vary. Refer to page 97.

A: USB connection cable (supplied)

B: AC adaptor (DMW-CAC1; optional)

96

Page 96
Image 96
Panasonic DMC-FZ20GN operating instructions Connecting to a PC