Lux Products 3M-22 warranty RH G 4 Wire Heat/Cool, O W2

W Y RH G 4 Wire Heat/Cool PG 17

STEP 1 - Connect the W wire to the W terminal on the		SET JUMPERS
thermostat. This connects to the heater control line.
			4		5
STEP 2 - Connect the Y wire to the Y terminal on the
		1 2 3	6		7
3M-22. This connects to the Cooler compressor.			8
STEP 3 - Connect the RH or R wire to the RH terminal on
the thermostat. This connects the Heater/Cooler Power.
STEP 4 - Connect the G wire to the G terminal on the
Thermostat. This connects to the Fan.
STEP 5 - Set Config jumpers per this diagram. If you				HVAC SYSTEM
have Electric heat set 5, if you have Gas or Oil set 7.			C W Y			R
Your HVAC system is now connected	OPTIONAL POWER
to the 3M-22.
Please Go To Page 9

or

G

		3M-22	C B O W2 W Y Y2 RH RC G A
		Terminals
W Y RH RC G	5 Wire Heat/Cool					PG 18
STEP 1 - Connect the W wire to the W terminal on the				SET JUMPERS
thermostat. This connects to the heater control line.
					4	5	or
STEP 2 - Connect the Y wire to the Y terminal on the
3M-22. This connects to the Cooler compressor.				1 2 3	6	7
					8
STEP 3 - Connect the RH wire to the RH terminal and the
RC wire to the RC terminal on the 3M-22. This connects
the Heater and Cooler Power.
STEP 4 - Connect the G wire to the G terminal on the
Thermostat. This connects to the Fan.						HVAC SYSTEM
STEP 5 - Set Config jumpers per this diagram. If you					C W Y RH RC		G
have Electric heat set 5,	if you have Gas or Oil set 7.
Your HVAC system is now connected			OPTIONAL
to the 3M-22.			C B O W2	W Y Y2 RH RC G A
Please Go To Page 9		3M-22
		Terminals