Lux Products 3M-22 warranty Stage Heat and Cool, RH A? Zoned Hot Water Motor Valve

C B O W2

W2 W Y Y2 RH RC G	2 Stage Heat and Cool						PG 21
STEP 1 - Connect the W wire to the W terminal and W2 to
W2 on the 3M-22. This connects 2 stages of heat.
STEP 2 - Connect the Y wire to the Y terminal and Y2 wire
to Y2 on the 3M-22. This connects 2 stages of cool.					SET JUMPERS
STEP 3 - Connect the RH or R wire to the RH terminal on
					4	5		or
the thermostat. This connects	the Heater/Cooler Power.
STEP 4 - Connect the G wire to the G terminal on the			1 2 3		6	7
					8
Thermostat. This connects to the Fan.
STEP 5 - Set Config jumpers per this diagram. If you				HVAC SYSTEM
have Electric heat set 5, if you have Gas or Oil set 7.			C W2		W Y Y2	RH RC		G
Your HVAC system is now connected		OPTIONAL
to the 3M-22.		POWER
Please Go To Page 9

3M-22 Terminals

W Y Y2 RH RC G A

W RH [A?] 3 Zoned Hot Water - Motor Valve PG 22

Step 1 - based on your valve type

Motor driven Valve- Connect the R (or RH) wire to the RH terminal on the 3M-22. Connect the W wire to the W terminal on the 3M-22. Connect the remaining wire to the A terminal. Solenoid valve -Connect the R (or RH) wire to the RH terminal on the 3M-22. Connect the W wire to the A terminal on the 3M-22. Connect the remaining wire to the W terminal.

STEP 2 - Set Config jumpers per this diagram.

Your system is now connected to the 3M-22.

SET JUMPERS

1 2 3

45

6 7

Motor Valve

W R A

Please Go To Page 9	3M-22
	Terminals

C B O W2 W Y Y2 RH RC G A