FAQ Guide Overview
3
1. Connecting the SC21FD3044-161 System to the Router
What is the correct order for connecting the SC21FD3044-161 System to the Router?
The SC21FD3044-161 System MUST be connected to the Router before the System is powered
on.
If this connection order is not followed, the System will not communicate on your internal network
correctly, and you will not be able to remotely access your system.
Step 1: Confirm the Router is
turned on.
Step 2: Connect the Ethernet
cable from the Ethernet port on the
rear of the SC21FD3044-161
System to an open port on the
Router
Step 3: Turn on the System
Step 4: Record the MAC Address
and IP Address of your unit. This
information can be found by
pressing the ENTER button on the
REMOTE CONTROL
EXAMPLE:

Router

SC21FD3044-161 Combo CRT/DVR
. MAC Address:
_______________________
(no spaces or : are needed for setup)
. IP Address:
_____ . _____ . _____ . _____
[ SYSTEM INFORMATION ]
IP:
PORT:
MAC:
HDD:
TOTAL:
FREE
VER: MMM/DD/YY V.#.#
MASTER
### GB
### GB
192 168 001 150
5000
12 34 56 78 90 AB
SLAVE
--- GB
--- GB
RECORD YOUR SYSTEM
INFORMATION