10
7. Can I view 8 live Cameras at the same time?
Is there a way to view all 8 cameras at the same time?
You cannot view all 8 cameras on one screen, even though you can view 4 live channels and 4
playback channels at the same time, this unit only supports live view on 4 channels at a time.
Netviewer will also only show four channels at a time. If you press Q1 and Q2, you may switch
between pages but you cannot view all 8 at the same time. If you use the PIR sensors on the
cameras and alarm set in ON, then Netviewer will also automatically switch between pages.
8. Will Motion Detection Recording start on QUAD 2 when I am
viewing QUAD 1?
If I am viewing live video on QUAD 1 and motion occurs in QUAD 2, will the unit switch to the
detected motion and start recording?
If you are viewing QUAD 1, motion detection will not trigger recording on quad 2. The only way
around this is using cameras with motion sensors. If you connect these motion sensor cameras
and set up your alarm recording, the unit will automatically switch to the quad that picked up
motion and begin recording.
9. How can I set up Alarm Recording?
I would like to set up Alarm Recording on my unit - what type of Cameras will I need?
The Alarm recording option can only be configured using Cameras with PIR Sensors. If the
Camera does not include a PIR Sensor, then the Alarm Recording functionality cannot be used.
10. What functions does the USB slot support?
I would like know how to use the USB slot functionality - what functions and devices can I use?
The USB Slot supports USB Memory sticks. It does not support removable USB Hard Drives.
The USB Slot can be used to update the Firmware, or to make backup copies or previously
recorded content. The USB Slot can NOT be used for direct recording (i.e. you cannot record live
video directly to the drive)