LOREX Technology SG17LD800 How do I set up Network Audio for use with the Remote Agent software?

How many Audio Channels are available Listen-in Audio?

How do I set up Network Audio (for use with the Remote Agent software)?

Setting the Network Audio Transmit and Receive to ON allows the system to send Audio data through the network. Live listen-in audio can then be accessed using the Remote Agent software (refer to your Remote Agent Manual for further information on this feature).

1.Enter MENU mode by pressing the MENU button on the front panel of the system (or on the Remote Control). Select the SYSTEM SETUP Option.

2.Select the SOUND menu from the MAIN menu. Navigate using the up and down arrows on the front panel (or remote control). Highlight the selection in Green, and press the ENTER button to enter the SOUND Menu.

3.Select the AUDIO Option. Navigate using the up and down arrows, and press the ENTER key to select the AUDIO Option:

•Network Audio TX - Sets Network Audio Transmission to ON

•Network Audio RX - Sets Network Audio Receive to ON

How many channels will have recorded Audio?

Only the FIRST 4 CAMERAS will record audio (simultaneously). Recorded audio will be available when the video playback is selected. Channels 5~8 do NOT record audio.

4