Lowel Light Controlling Light Intensity, Caselite 2 Switch Caselite 4 Switches, Fuse Change

Caselite® Operations

Light intensity is controlled through the individual lamp switches. In each Caselite, the first tube is controlled by the AC switch in the power cable and remaining lamps are controlled by the switch(es) on back of fixture.

ATo turn the fixture on, Click the power switch on the AC cable. This will turn lamp 1 on.

BOperate the switches on the back of the unit to turn the other lamp(s) on. By using these switches,

you will be able to control light intensity level.

Controlling Light Intensity

Caselite 2 Switch

Caselite 4 Switches

Fuse Change

The Caselites come with a user-replace- able mini fuse which is installed in

a small holder on the same plate as the exterior AC power socket. Access the fuse by removing the cap with a small flathead screwdriver. Swap fuse if necessary and replace holder.

Caselite2 ETL model

uses fuses rated at 3.15 Amps and 250 Volts.

Caselite4 ETL model

uses fuses rated at 5 Amps and 250 Volts.

Fuse

Lamps

The Caselites use compact (55 watt) fluorescent lamps.

GE Cinema-Plus®Lamps

(Manufacturer rated lamp life 8,000 hrs)

Better lighting for film (still or motion picture) due to better color rendering with film emulsions. May require “minus green” filtration gel (1/8).

Tungsten	CRI	°K
FLC55-TU Cine-Plus 55w/	90+	3200
Daylight	CRI	°K
FLC55-DA Cinema-Plus 55w	90+	5500

Osram Studioline® Lamps

(Manufacturer rated lamp life 8,000 hrs) Designed for use in video & digital imaging for higher output.

Tungsten	CRI		°K
FLS-55TU	Studioline 55w/3200	85	3200
Daylight	CRI		°K
FLS-55DA Studioline 55w/5600		85	5600

Lamps & Lamp Changes

Lamp Changes

To change a lamp, remove the plastic eggcrate (if attached) by releasing the snap-locks on each end. Remove both metal endplates by turning the twist- locks (see illus.). Note that the light- tube sockets are installed on alternating ends of the fixture. To remove a tube, gently grasp it by its glass end and swing it slightly out from the fixture while pulling it carefully from the sock- et. Replace lamp in same way, opposite order. (Be very careful as lamp-tubes are fragile and can easily shatter. Read

lamp mfr's Warnings).

Voltage Selector

The Caselite has an auto voltage setting ballast. The Caselite will set itself automatically from 120 - 240v.

3