Lowel Light 2, 4 Light Controls, Barndoor/Intensifiers, Egg Crates, Gel Clips, Problems, Repairs

Lowel Caselite® Instructions

Light Controls

Barndoor/Intensifiers

The dual purpose Barndoor/Intensifiers add versatility & output to the Caselite. With the mirror-finish Intensifier side facing in towards the lamps, output can be increased by approximately 40% depending on door positioning. The black Barndoor side can be useful in trimming the spill & output of the fixture.

To reverse the doors, open them fully & loosen the twist-locks on the black side. Slide the barndoor/intensifier straight out to remove. Flip the door & reinstall, turning the twist-locks to retighten.

Egg Crates

Caselite comes with a detachable plastic egg crate attached to the inside flap of the storage lid. It can be very useful in controlling spill of the light, with some loss of output. To remove, flip the release levers on each end of the

egg crate and carefully remove. Snap egg crate onto fixture in front of lamps.

Gel Clips

Gel Clips are installed on each end of the fixture to hold gel pieces cut to the size of the lamp area. Use enclosed Lowel Gel-jaws clips when attaching a larger piece of diffusion material to the outside edges of the Barndoor/ Intensifiers to further soften the light.

Note: by doing this you are creating a larger, and therefore softer, light-source.

Problems, Repairs &

Repairs, problems, suggestions and requests for brochures/ catalogs, instructions and parts lists can be handled through your Authorized Lowel ealer/Distributor or directly through Lowel. Electrical repairs should be made only by Lowel or by

a qualified electrician. Caselites are designed and manufac- tured by Fluo-Tec, Mexico in collabora- tion with Lowel-Light Mfg., Inc.

Closing/Transporting

Replace eggcrate, if used, on the lid flap and snap its locks into the retaining holes. Fold Barndoor/Intensifiers in towards lamps. Loosen stand fitting

at stand and remove unit & bracket from stand, laying fixture face down on a table/floor. Loosen large locking knob and remove the stud end of the Stand-fitting Tilt-bracket. Turn the

4 twist-lock knobs to unlock the Mounting Plate from the fixture and remove it. Place both Mounting Plate, Stand-fitting Tilt-bracket inside lid com- partment, taking care that it will fully close. (If using kit version, place Uni Sr. Stand in lid also), See illus. below for most efficient packing order. Secure storage lid flap with locking straps. Laying the lid on its back, replace fixture on top and close the twist-lock brackets, turning them to securely lock the Caselite closed. If transporting the unit in rainy weather, use the optional rain cover to prevent leakage.

Note unit is not waterproof, avoid leav- ing closed unit exposed to rain or excessive dampness.

ver 2.3 © 2009, Lowel-Light Mfg., Inc. 260

Lowel-Light Manufacturing, Inc.

90 Oser Avenue, Hauppauge, N.Y. 11788 Call: 800 645 2522 or 631-273 2500 e-mail info@lowel.com www.lowel.com

4