Nut

washer

 

Rubber

Metal washer

washers

 

Bolt

Assemble transducer and bracket.

B. Two-piece bracket: Once you determine the correct position for the ratchets, assemble the transducer as shown in the figure in step 2B. Don't tighten the lock nut at this time.

Bolt

Lock washer

Nut

 

Flat washer

Flat washer

Assemble transducer and bracket.

4.Drilling mounting holes.

Hold the transducer and bracket assembly against the transom. The transducer should be roughly parallel to the ground. The transduc- er's centerline should be in line with the bottom of the hull. Don't let the bracket extend below the hull!

8