Bracket Installation

Recommended tools for this job include: drill, 1" (25.4 mm) drill bit and

a screwdriver. Required supplies for this job include: high quality, marine grade above- or below-waterline caulking compound, three #10 stainless steel screws. Screw length and type should be suitable for the material on which you intend to mount the bracket.

Mount the unit in any convenient location, provided there is clearance when it’s tilted for the best viewing angle. You should also make sure there is enough room behind the unit to attach the power/transducer cable. (See the following drawings, which show the dimensions of a gimbal-mounted X-4 sonar unit.)

107.5

82.7

[3.26]

[4.23]

 

156

[6.26]

 

12.09 [0.48]

 

76.9

Millimeter

70.3

[3.03]

[Inch]

[2.77]

Front view (left) and side view (right) showing dimensions

of the X-4 when mounted on quick release bracket.

15