Rear

Ratchetview

Screw hole

Cable slot

Depress

 

Power/transducer

ratchets

cable

to release

X-4 quick release mounting bracket (left). Adjusting the viewing angle of a display unit (right).

Attach the unit to the bracket by first connecting the power/transducer and accessory cables. Then, hold the sonar unit vertically and slide it onto the bracket from above. (The back of the unit should be touching the front of the bracket as you lower it into position.) As you push down, the unit will lock into place with a distinct click.

To adjust the viewing angle, pinch the ratchets with one hand, then tilt the unit with your other hand. Release the ratchets and the unit locks into the new position. To dismount the unit for storage, press the ratchets and lift the unit off the bracket.

Portable Sonar Installation

Like many Lowrance products, the X-4 sonar is capable of portable op- eration. It uses the optional PPP-12 portable power pack.

The PPP-12 package includes the power pack, battery adapter and a portable transducer. The transducer can be stored inside the power pack. The PPP-12 requires eight AA alkaline batteries. Batteries are not included.

17