Lowrance electronic X125, X135, X136DF, X126DF manual Sonar Menu

•Reset Water Distance command: resets water distance log to zero.

•Sonar Simulator command: turns the simulator feature on and off. Useful for learning how to operate the unit and all its functions.

•Transducer Type command (dual-frequency units only): sets the type of transducer plugged into the unit.

•Reset Options command: returns all options and auto functions to their original factory settings. It's a great safety net while you're learning and experimenting with various settings.

•Set Language command: your unit has menus in 10 different lan- guages. This command switches from one language to another.

•Software Information command: tells you which version of the op- erating software is loaded in your unit.

Sonar Menu

The Sonar Menu contains commands for the major sonar features and options. You access the Sonar Menu by pressing the MENU key one time. You run a command by using the ↑ or ↓ to highlight the command and then pressing ENT. To clear the menu screen and return to the Page display, press EXIT.

Sonar Page Menu. Most of these functions are discussed in Sec. 4.

Sonar Menu Commands

The Sonar Menu contains commands for the major sonar features and options. Most of them are only described in detail in Sec. 4, but Sensitiv- ity and Auto Sensitivity are important basic functions that are discussed both here and in Sec. 4. The other Sonar Menu commands include:

•Grayline command: separates fish and structure near the bottom from the actual bottom, and defines bottom composition/hardness.

•Depth Range command: manually sets the depth range shown on the sonar chart.

34