Lowrance electronic X126DF, X135, X136DF, X125 manual Chart Speed

when making your calculation.) After you have a correction figure, here's how to enter it:

1.Press MENUMENU↓ to CALIBRATE WATER SPEEDENT.

2.Enter the number you calculated earlier: press ↑ or ↓ to change the

first character (+ or –), then press → to move the cursor to the next number and repeat until the percentage is correct, then press EXIT.

Chart Speed

The rate that echoes scroll across the screen is called the chart speed. The default is maximum; we recommend that you leave the speed set there for virtually all fishing conditions.

However, you might consider experimenting with chart speed when you are stationary or drifting very slowly. You may sometimes achieve bet- ter images as you slow down the chart speed to match how fast you are moving across the bottom.

If you are at anchor, ice fishing or fishing from a dock, experiment with a chart speed around 50 percent. If you are drifting slowly, try a chart speed around 75 percent. When you are stationary and a fish swims through the sonar signal cone, the image appears on the screen as a long line instead of a fish arch. Reducing the chart speed may result in a shorter line that more closely resembles a regular fish return.

At left, Sonar Page menu with Chart Speed command selected.

At right, Chart Speed Control Bar.

If you do experiment with chart speed, remember to reset it to maxi- mum when you resume trolling or moving across the water at higher speed. To change chart speed:

1.From the Sonar Page, press MENU↓ to CHART SPEEDENT.

2.The Chart Speed Control Bar appears. Press ↓ to decrease chart

47