1.After selecting Fuel Used as overlay data, fill up your tank and press

MENUMENU.

2.Select NMEA 2000 and press ENT.

3.Highlight FUEL MANAGEMENT and press ENT. Select TANK LOCATION and press ENT.

4.Use ↑ ↓ to select the location (Port, Center or Starboard) of the en- gine interface you want to calibrate and press ENT.

5.Highlight FILL TANK and press ENT. The following confirmation mes- sage will appear: Are you sure you wish to Fill Tank?

6.Select YES and press ENTER. The following confirmation message will appear: Do you wish to re-calibrate the device?

7.Highlight NO and press ENT. Take your vessel out on the water and burn at least five gallons of fuel. Be sure you run only ONE engine

— the engine connected to your engine interface.

9.Fill up your tank again, noting how much fuel you added to the tank. Compare that number to the Fuel Used figure displayed on the page you customized. If the amount of fuel you added to the tank and the fuel used figure are off by more than 3 percent, we recommend the en- gine interface be calibrated.

NOTE:

You must use the gauge's Fill Tank command when filling your fuel tank to keep the engine interface updated with correct information on the amount of fuel in the tank.

To calibrate a Suzuki Engine Interface:

10.If calibration is necessary, press MENUMENU, select NMEA 2000 and press ENT.

11.Highlight FUEL MANAGEMENT and press ENT.

12.Select TANK LOCATION and press ENT to choose the location of the tank connected to the selected engine interface. Press ENT.

13.Highlight FILL TANK and press ENT. The following message will ap- pear: Are you sure you wish to Fill Tank? Select YES and press ENT.

14.The following message will appear: Do you wish to re-calibrate the device? Select YES and press ENT.

15.Repeat these steps for each engine interface you want to calibrate.

Engine Trim Calibration

Engine Trim is calibrated through the Suzuki Engine Interface Device Configuration menu.

1.Press MENUMENU, select NMEA 2000 and press ENT.

2.Choose BUS SETUP and press ENTER. Select the Suzuki Engine Inter- face connected to the desired engine and press ENT.

110

Page 116
Image 116
Lowrance electronic X515C DF, X510C manual Engine connected to your engine interface, Engine Trim Calibration, 110

X510C, X515C DF specifications

The Lowrance X515C DF and X510C are advanced fishfinders that cater to both novice and experienced anglers looking for an edge on the water. These cutting-edge devices integrate high-end technology with user-friendly interfaces, making them ideal for various fishing environments, from serene lakes to turbulent coastal waters.

Starting with the X515C DF, this model is equipped with a high-resolution color display that provides vivid images and superior clarity. The 320 x 240 pixel resolution enhances the ability to distinguish between different types of fish and underwater structures. One of its standout features is its Dual Frequency sonar, which operates at both 200 kHz and 83 kHz frequencies. This flexibility allows users to choose the most suitable frequency for their fishing conditions—200 kHz provides detailed readings for shallow water, while 83 kHz excels in deeper conditions.

The X515C DF also includes features such as Fish ID, which uses advanced algorithms to identify fish targets, making it easier for anglers to locate their quarry. Additionally, the unit offers a built-in GPS chart plotting capability, enabling users to navigate and mark waypoints effectively. This is particularly valuable for returning to successful fishing spots with ease.

On the other hand, the X510C maintains the high standards set by its counterpart but with a focus on essential functionalities that fit the needs of anglers who prefer a simpler setup. This model also showcases a 320 x 240 pixel high-resolution color screen and provides excellent visibility in various lighting conditions. The X510C features a robust sonar system that supports 200 kHz and 83 kHz frequencies, helping anglers locate fish and assess underwater topography effortlessly.

Both models are designed with user-friendly menus and controls, ensuring that even those new to fishfinding technology can navigate with ease. They also boast rugged construction to withstand the demanding conditions often faced by fishing enthusiasts.

In conclusion, both the Lowrance X515C DF and X510C deliver exceptional performance, innovative technologies, and features that enhance the fishing experience. With their dual frequency capabilities, high-resolution displays, and intuitive designs, these fishfinders empower anglers to make informed decisions, ultimately increasing their chances of a successful outing on the water. Whether choosing the advanced features of the X515C DF or the simplicity of the X510C, both units promise to enhance any fishing expedition.