Refer to the MegaRAID Device Driver Installation User’s Guide on the Universal Driver Suite CD for information about installing the device drivers. Be sure to use the latest Service Packs provided by the operating system manufacturer and review the readme file that accompanies the driver.

Note: The SATA 150 adapters do not support the Windows® NT operating system. See the LSI Logic web site for the latest operating systems and drivers.

1.1.9Technical Support

For assistance installing, configuring, or running your MegaRAID SATA 150 RAID storage adapter, contact LSI Logic Technical Support.

E-mail:

support@lsil.com

eurosupport@lsil.com (Europe)

Phone Support:

1-800-633-4545 (North America)

+44.1344.413.441 (Europe)

Web Site:

http://www.lsilogic.com/support/index.html

1.2SATA 150 Storage Adapter Characteristics

This section describes the hardware and software characteristics of the SATA 150 storage adapters, and the software utilities you can use for RAID management. All models of the SATA 150 storage adapter support these aspects of the Serial ATA and PCI specifications:

•Serial ATA, Revision 1.0, specification:

–150 Mbytes/s bus speed

–Theoretical 1.5 Gbits/s data transfer rate

1-6Introduction

Copyright © 2002–2006 by LSI Logic Corporation. All rights reserved.