LSI SATA 150 Revision History, Related Publications, MegaRAID Configuration Software User’s Guide, MegaRAID Device Driver Installation User’s Guide

Related PublicationsMegaRAID Device Driver Installation User’s Guide

Document Number: DB11-000018-02

This document explains how to install the MegaRAID device driver for your operating system. The information in this document is independent of the back-end bus and applies to both MegaRAID SCSI storage adapters and Serial ATA storage adapters.

MegaRAID Configuration Software User’s Guide

Document Number: DB15-000269-01

This document explains how to use the RAID system configuration, monitoring, and management tools that MegaRAID provides. These tools include the BIOS-based MegaRAID Configuration Utility and WebBIOS Configuration Utility, as well as the MegaRAID Manager OS-based tool and the Power Console Plus OS-based tool. The information in this document is independent of the back-end bus and applies to both MegaRAID SCSI storage adapters and Serial ATA storage adapters.

Revision History

Revision	Date	Remarks

1.5	July 2006	Corrected text about the J4 Write Pending connector for the SATA
		150-6 and SATA 150-4 controllers. Updated jumper information to
		state not to use a jumper on the J1 connector for SATA 150-6 and
		SATA 150-4. In addition, updated contact information for Technical
		Support.

1.4	September 2004	Added information about drive roaming, drive migration, and
		alarm beep codes. Did general editing on the document.

1.3	November 2003	Added a note about operating system support, logical drive dele-
		tion, and headings for RAID Configuration Utilities and Technical
		Support in Chapter 1. Corrected version number for the Serial
		ATA specification (1.0).

1.2	September 2003	Added enclosure management information and updated the list of
		supported operating systems.

Preface

vii