Chapter 2
Detailed Host Adapter Installation
This chapter provides detailed instructions on how to install the LSI Logic Ultra320 SCSI to
•Section 2.1, “Installing your Ultra320 SCSI Host Adapter,” page
•Section 2.2, “SCSI Device Cables,” page
•Section 2.3, “Connecting SCSI Devices,” page
•Section 2.4, “Terminating the SCSI Bus,” page
•Section 2.5, “Setting SCSI IDs,” page
•Section 2.6, “Completing the Installation,” page
2.1Installing your Ultra320 SCSI Host Adapter
This section provides detailed instructions for installing your host adapter and connecting your SCSI devices to it. The following illustrations show the
2.1.1 Selecting a PCI Slot
Step 1. Turn off and unplug your computer
Warning: Be sure to disconnect the computer’s power before you remove the cover and install the Ultra320 SCSI host adapter.
Step 2. Open your computer cabinet by removing its cover.
Step 3. Be sure to touch a grounded metal surface to discharge static electricity before removing the host adapter from its package.
Ultra320 SCSI to |
Version 2.1 | Copyright © |