LSI Ultra320 2.3 Connecting SCSI Devices, 2.3.1 Connecting Internal SCSI Devices, Figure 2.6 Connecting Internal SCSI Cable to Host Adapter

2.3 Connecting SCSI Devices

This section explains how to connect internal and external SCSI devices to the Ultra320 SCSI host adapters.

2.3.1 Connecting Internal SCSI Devices

This section provides step-by-step instructions for connecting internal SCSI devices. The figures show the LSI22320 host adapter, which has two internal connectors and two external connectors. Other Ultra320 SCSI host adapter models have different numbers of connectors. Refer to Section 2.2.1, “Internal SCSI Cables,” page 2-4for examples of internal cables.

If you only need to connect external devices, skip to Section 2.3.3, “Connecting External SCSI Devices,” page 2-9.Otherwise follow these steps:

.

Step 1. Plug the 68-pin connector on the end of the SCSI ribbon cable into the internal connector on the host adapter. Figure 2.6 shows how to do this.

Figure 2.6 Connecting Internal SCSI Cable to Host Adapter

2-6 Detailed Host Adapter Installation

Version 2.1 Copyright © 2002-2003 by LSI Logic Corporation. All rights reserved.