Step 2. Plug the 68-pin connector on the other end of the internal SCSI ribbon cable into the SCSI connector on the internal SCSI device. Figure 2.7 shows how to do this.

Figure 2.7 Connecting Multiple Internal SCSI Devices

Step 3. If you have another internal SCSI device, connect the internal SCSI ribbon cable to it. Figure 2.7 shows how to do this. You can connect other devices if the cable has more connectors.

The Ultra320 SCSI host adapters support up to 15 SCSI devices connected to each SCSI channel.

Step 4. Be sure that termination is enabled at the end of the cable that is farthest away from the SCSI host adapter. See Section 2.4,

Connecting SCSI Devices

2-7

Version 2.1

Copyright © 2002-2003 by LSI Logic Corporation. All rights reserved.