LST LAM48-1, PTU288-1 specifications LED Connection Cord, Have to be actuated

LED Connection Cord

The 2-wire connection cord serves to connect light emitting diodes or relays to the LED Connection Mo- dule LAM48-1. The cord is needed if other than the pre-assembled LEDs are used, or if more than two Re- lay Modules RL58-1 or RL58-2 – which can be directly connected to the LED connection module via fl at cable

– have to be actuated.

At one end of the cord there is a connector which fi ts to the pin connector of the LED Connection Module LAM48-1, and the other end of the cord is open.

Specifications

Line length	2m
Order number	259013
Order name	Cord 2-Wire for LED Connection/10pcs. LED-LEITUNG-10

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27	PTU288-1_DBL_LST_EN_0804.PDF • PAGE 3
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED