EN
HANDSET SETTINGS
18

SETTING THE RING TONE

USING SPEAKERPHONE DURING A CALL

During a call:
• Press to turn the speakerphone on.
• Press again to end the call, or press to turn the speakerphone off
and use the handset again.
IMPORTANT
• If you press the button you will enter Talk Mode.
• If you press the button you will enter Menu Mode.
• You cannot enter the Menu Mode when the phone is in Talk Mode. To exit
the Talk Mode press .
• When you have completed a setting 2 beeps will sound to indicate that
the task is complete.
• To leave a setting at any time and return to Standby Mode, press C.
You have a choice of 10 polyphonic melodies and 4 tones for incoming
calls. To select a ring tone:
1.Press , then use or to select “Handset Setting”.
2.Press .
3.Select “Ringtone”, then press .
4.Select the melody or tone you prefer, then press to confirm.
NOTE: If the ring volume is turned off, you will not hear the ring melody
while adjusting the ring tone.

SETTING THE RING TONE VOLUME

1.Press , then use or to select “Ringer Volume”.
2.Press , then use or to increase or decrease the
volume.
3.Press to confirm.
manual-E.p65 2004/10/25, PM 06:4823