Luce LS328 user manual Setting the Base Unit Time Format, Setting the Base Unit Date

EN

6.Press to make the AM / PM option flash. Select AM / PM, then

press to set the time. (When using the 24 hour clock you will not be asked to select AM / PM.)

SETTING THE BASE UNIT TIME FORMAT

1.Follow steps 1 and 2 above, then select “TIME FORMAT” and press .

2.Select “12 or 24 Hour Format” and press to confirm.

SETTING THE BASE UNIT DATE

1.Press , then use or to select “SET TIME & DATE”, then

press .

2.Select “SET DATE”, and press .

3.Use or to scroll through the numbers and to move between the days, months and years.

SETTING THE BASE UNIT DATE FORMAT

1.Follow steps 1 and 2 above, then select “DATE FORMAT” and press .

2.Select “dd/mm/yy” or “mm/dd/yy” and press to confirm.

SETTING THE BASE UNIT ALARM

1.Press , then use or to select “ALARMS”.

2.Press .

3.Select “Alarm 1” or “Alarm 2”, then press . (A tick will appear next to a previously enabled alarm.)

4.Select “Yes” and press .

5.Use or to set the time of the alarm and to select hours or minutes. (If you are using a 12-hour clock format you will need to select AM or PM using the arrow buttons.)

6.When the time is set, press and “Alarm Tone” options will appear.

7.Select 1 of the 4 available tones, then press . A tick will appear next to your selected tone and the phone will go to Standby Mode.

21