![](/images/new-backgrounds/1256821/25682117x1.webp)
Change Descriptions
The following problems are corrected and addressed in DEFINITY Enterprise Communications Server (ECS), Release 6, Issue 2.1 (02.1.125.1).
1.When an
2.A customer with a BRI terminal that is capable of seeing cause values saw “Normal Call Clearing” when listening to any announcement or tone when it timed out or completed. Now, if that user is listening to reorder, busy or Intercept tone and the tone times out, that user sees a cause value that represents the reason for the tone, that is¨ “User Busy” or “Call Rejected.”
3.Assume that station A called station B, station B conferenced station C, and station C covered through DCS to a remote station D. After B dropped, station C displayed its own name. Now, after station B drops, C displays station A's name and station A displays station C's name.
4.When a bridge of the originating party dropped out of a call that had routed
5.Station A had a remote coverage point and the station was forwarded to station B. When a call was placed to station A when station B was active, the call did not go to the coverage point.
6.When TTI was turned on and a station was call forwarded, a user could remove the call forwarded station and add a new station with the new station being forwarded to the destination of the removed station.
7.Removing an EPN cabinet without first turning off TTI caused translation corruption.
Issue 2 May 1998 7