Lucent Technologies 108488222 manual Operating Range Requirements, Telephone Installation

CALLMASTER® V Telephone Console User’s Guide 555-233-735	Issue 1
Operating Range Requirements	9

Operating Range Requirements

The total distance between the CALLMASTER V telephone (with Recorder Interface active) and the recording device should not exceed

200 feet/ 60.96 meters.

The distance between the CALLMASTER V telephone and the PBX must NOT exceed the following:

With 22-gauge wire, the distance between the CALMASTER V and the PBX should not exceed 5,500 feet/ 1,676.4 meters; with 24-gauge wire, the distance should not exceed 3,500 feet/ 1,066.8 meters; with 26-gauge wire, the distance should not exceed 2,200 feet/ 670.56 meters.

The record output impedance is approximately 600 ohms and the output channel is isolated from the telephone via a voice transformer that meets the UL 1950 Dielectric Breakdown requirement of 1,000 URMS for one minute.

Telephone Installation

The CALLMASTER V telephone can be either desk-mounted or wall-mounted. Read the following safety instructions and use the following directions and refer to the following figure of the rear of the telephone for installing these telephones.

1

2

7

3

4

6

5

FIGURE 4 The CALLMASTER V Telephone Console, Rear View