Lucent Technologies 108488222 Headset Connections with the Callmaster, Headset On/Off button

CALLMASTER® V Telephone Console User’s Guide 555-233-735	Issue 1
The CALLMASTER V Telephone Console	2

The following features correspond to the numbers in Figure 1.

1)	Telephone Notepad		8) Volume control button
2)	Mute (or	) button	9) Display
3)	Speaker (or	) button	10)	Softkeys
4)	Transfer/Test (or	) button	11) Display control buttons
5)	Redial (or	) button	12)	Hold (or	) button
6)	Conf/Ring (or	) button	13)	Call appearance/feature buttons
				(See Note immediately below)
7)	Dial pad		14)	Message light — labeled
Note: Two feature buttons must be administered in the following ways:
	• One of the feature buttons must be designated as the
	Headset On/Off button;
	• The Release feature must be administered on a second feature
	button.

Headset Connections with the CALLMASTER V

The headset connection for the CALLMASTER V consists of a headpiece (shown as 1 in Figure 2 below) which is plugged into an adapter cord (shown as 2).

Note: Your system manager MUST administer a Headset On/Off button on your set. Use this button to turn your headset on and off. For instructions for using this feature button, see “Headset On/Off” in the section titled Call-Handling Features.

1

2

3

FIGURE 2 The Headset Connected to One of the Headset Jacks (shown as 3) on the CALLMASTER V Telephone