Lucent Technologies Octel 100 specifications Desktop Platform Backplane Diagram

PC SPECIFICATION SHEET

Desktop Platform Backplane Diagram

In the Desktop platform, voice boards are installed starting with the right-hand slot, as viewed from the back of the PC. On each card, the upper jack is tied to the lowest numbered ports. The example diagram indicates the connector designations for the DIALOG/4 board. When a single fax board is present, it is installed in the fourth slot from the right, as viewed from the back of the PC. If two fax boards are present, the first will be in slot three and the second will be in slot four. Fax ports are marked CH1 (upper) and CH2 (lower) on each board.

The types and number of cards installed will depend on your system configuration. The Network Interface Card (NIC) is optional.

Tower Platform Backplane Diagram

In the Tower platform, voice boards are installed starting with the 5th slot from the top, as viewed from the back of the PC. On each card, the left jack is tied to the lowest numbered ports. The example diagram indicates the connector designations for the DIALOG/4 board.

When a single fax board is present, it is installed in the 12th slot from the top, as viewed from the back of the PC. If two fax boards are present, the first will be in slot 12 and the second will be in slot 11. Fax ports are marked CH1 (left) and CH2 (right) on each board.

The types and number of cards installed will depend on your system configuration. The Network Interface Card (NIC) is optional.

Sentinel/Printer

Pwr

Serial Ports

A B

NIC

(when required) 1

Modem	2
	Mouse Keyboard Video
CPU Slot	3
(Empty)	4

J1 J2

First Voice Board	5
(ascending
voice port #’s)	6
Additional
Voice Boards
	7
	8
	9
(ascending	10
Fax port #’s)

Fax Board

(2nd slot filled)

11

Ch1 Ch2

Fax Board 12

(1st slot filled)

Serial Board	13
(when required)

101-1773-001 OCTOBER 1999, ISSUE 1 2