Upholstered

 

Back Cushion

Elastic Band

Figure 1

Shipping

Support

Clevis Pin

Wire Ring

Receiving Tubes

Frame

Key Ring

 

 

 

Strap

Hook

Figure 2

Side Panel

Cut-Out

Slide

Push

Here

Figure 3

BACK ASSEMBLY

NOTE: Do not remove the shipping support which is attached to the recliners upholstered back until after the recliner's upholstered back has been assembled to chair.

1.Obtain upholstered back assembly. Remove the upholstered cushion from the metal back frame (See fig. 1).

2.Remove pins and wire rings from frame (See fig 1).

3.Slide back tubes onto receiving tubes on frame and tap down until holes in back line up with holes in frame (See fig. 1).

4.Replace pins and wire rings. Remove the shipping support and discard (See fig 1).

5.Slide the lower elastic band on back to cover pins. Position other straps evenly. The 2" elastic bands can be adjusted for custom comfort.

6.At the bottom of the cushion you will find two elastic straps with key rings on the ends (one on each side). Replace back cushion over metal frame. Attach each ring to the hook on the frame next to the seat rings (See fig 2).

SIDE PANEL ASSEMBLY

1.Face the side panel cut out towards the front of the chair.

2.Line up the panel’s spring clips with the round tubes on the frame. Push against the panels side until the clips are secured to the frame.

3.Slide the panel up or down until the panel is flush with the top of the frame (See fig 3).

4.Repeat above steps for the opposite side.

4

565DG/565TG Ortho-Biotic Preferred Care® Recliners Operating Instructions

Page 3 Page 5
Page 4
Image 4
Lumex Syatems 565TG, 565DG operating instructions Back Assembly, Side Panel Assembly
Page 3 Page 5

565DG, 565TG specifications

Lumex Systems has established a strong reputation in the realm of advanced LED displays with its innovative offerings, including the Lumex 565TG and 565DG series. These robust systems cater to a variety of applications ranging from industrial controls to consumer electronics, highlighting their versatility and adaptability.

The Lumex 565TG model is known for its high-performance characteristics, offering a bright and clear display that enhances visibility even in challenging lighting conditions. It is designed with a 5x7 dot matrix format, which enables the presentation of alphanumeric characters and symbols with clarity. The 565TG showcases a wide viewing angle and a remarkable contrast ratio, making it ideal for applications that require readability from various distances and angles.

In contrast, the Lumex 565DG is positioned as a dual-output display system, providing flexibility in presenting both alphanumeric and graphic information. This model utilizes advanced LED technology to ensure vibrant color representation and energy efficiency. The 565DG supports continuous operation, making it suitable for environments that demand reliability and endurance.

One of the primary technologies underpinning both models is the use of high-brightness LEDs, which not only contribute to their excellent luminance but also extend their service life. The displays are engineered for low power consumption, aligning with modern sustainability goals and reducing operational costs.

Additionally, both the 565TG and 565DG are equipped with built-in drivers, simplifying the integration process into existing systems. The compatibility with various communication protocols allows for seamless connectivity, making them user-friendly and efficient for developers and engineers.

The rugged design of Lumex displays ensures that they can withstand harsh environmental conditions, including wide temperature ranges and vibrations typically encountered in industrial settings. This durability is complemented by an ease of installation, making it straightforward for users to incorporate them into a variety of applications, from control panels to point-of-sale systems.

In summary, both the Lumex 565TG and 565DG series exemplify advanced engineering and design principles. Their key features, including high brightness, dual-output capability, and rugged construction, make them invaluable tools for enhancing user interfaces across multiple domains. As industries continue to evolve, Lumex Systems remains at the forefront of display technology, setting standards for performance and reliability in LED displays.
Top Page Image Contents