UPHOLSTERED BACK ASSEMBLY

1.Lift the skirt on the rear of the upholstered back, fasten skirt up with a small piece of tape to fully expose the "KD Bracket" that are to be mated to the recliner mechanism.

2.Carefully guide upholstered back onto the mechanism inserting both "bayonet links" at the same time thru cutouts in vinyl.

3.Push down on the back until the mechanism "bayonet links" are properly engaged into the

upholstered back "KD Brackets". The top of bayonet link should be even with top of KD Bracket. (See fig. 1)

4.Once back is properly seated onto mechanism insert the threaded knob thru "bayonet link", 'ED Bracket" and steel tube. Secure hand tight.

5.Remove tape lower upholstery skirt and secure to Velcro.

Upholstered Back

Upholstered Skirt

Threaded Knobs

Upholstered Back’s

KD Brackets

Steel Tube

Mechanism’s

Bayonet Links

Bracket and Link to be even

Threaded Knob thru large hole in Bayonet Link

KD Bracket

Bayonet Link

4

566DG Ortho Biotic Clinical Care® Recliner Operating Instructions

Page 4
Image 4
Lumex Syatems 566DG manual Upholstered Back Assembly