Fuse replacement 220V system only, Storage

Fuse replacement (220V system only)

tool needed: small screwdriver

1.If you suspect a blown fuse, disconnect the plug from the wall outlet immediately.

fuse

fuse cover

2.Use a small screwdriver to remove the cover of the fuse holder (fuse locations are shown in picture above).

3.Insert a new fuse of the correct rating (T1A/250V).

4.Replace the fuse holder cover. Ensure that fuse holder cover is securely installed.

1.Fold the bubble pad loosely.

2.Store bubble pad and pump in a dust-free environment with no exposure to direct sunlight.