5.Connect one end of the air tubes to the bubble pad: slide the ends of the air tubes over the connectors on the top of the foot end of the bubble pad.
6.Connect the other end of the air tubes to the pump connectors; ensure that the ends of the air tubes are firmly fitted over the bubble pad and pump connectors before continuing.
sNOTICE: Ensure that the air tubes are not kinked or tucked under the bubble pad or mattress.
WARNING: Locate all cords so that they will not be stepped on, tripped over, or otherwise subjected to damage or stress.
WARNING: Do not use a household extension cord if the electrical cord does not reach the power outlet. Use of an improper extension cord could result in fire and electric shock. If an extension cord must be used, use a three conductor cord with ground, properly wired, in good electrical condition, and keep it as short as possible.
WARNING: This
equipped with a cord that has a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.
WARNING: Ensure that the local power voltage is appropriate for the pump unit.
7.Plug the power cord into a properly grounded electrical outlet.
10 |
|
