5 SPECIFICATIONS, ALL MODELS *
* Specifications are subject to change without notice.
Deck | High position |
|
|
height |
|
|
|
|
| Deck height: High Position |
|
| US0208/US0208PL: | US0458/US0458PL with cast- | US0458/US0458PL with |
| 24.0 inches | ers in low position: 20.0 inches | casters in standard position: |
|
|
| 23.5 inches |
| Low position |
|
|
|
| Deck height: Low Position |
|
| US0208/US0208PL: | US0458/US0458PL with cast- | US0458/US0458PL with |
| 15.0 inches | ers in low position: 9.5 inches | casters in standard position: |
|
|
| 13 inches |
Bed length |
| Bed Length |
|
Note: To extend grid length (80 in.) to 84 in., install optional kit
(all beds).
All models: 87.0 inches
Deck width |
|
|
| Deck Width |
|
|
|
| |
|
|
| |||||||
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| All models: 36.0 inches |
|
|
Weight * | Normal operating conditions | 450 lb., evenly distributed including mattress, accessories, rails, etc. | |
|
|
| |
| * Maximum patient weight | 350 lb. | |
|
|
| |
Construction | Frame | 10 ga (.135) high strength, low alloy steel (roll formed) | |
| Sleeping surface | 11 ga (.120) cold rolled steel | |
|
|
|
|
Finish | 5 stage bath | 1. | S21F acid bath (cleans grease and oil from metal). |
|
| 2. | Fresh water rinse. |
|
| 3. | QuiliPhos 20 phosphate coat (inhibits rust and helps maintain |
|
| electrical charge during powder application). | |
|
| 4. | Fresh water rinse. |
|
|
|
|
|
| 5. | QuiliRinse 404 (seals metal for powder coating). |
|
|
|
|
All parts are then coated with a colored epoxy powder and baked 35 minutes at 375 degrees F. The powder coating finish is approximately 2.5 mils thick. The coating is smooth, uniform finish without runs, wrinkles, or grit.
14 |
