Installing the Batteries, Correct Measuring Posture

10	Installing the Batteries

1. To insert the batteries

A. Press down on the latch and lift the cover towards you to open the battery compartment.

B. Insert 4 "AA" batteries as indicated. Make sure to match polarities (+, –) on the batteries.

C. Replace the battery cover by inserting the two hooks at the bottom into the slot, then push on the top area.

Note: Please remove batteries when not in use for an extended period of time. Do not dispose batteries with household garbage.

Correct Measuring Posture	11

1. Place your elbow on a table

so that the cuff is at the sameFig. A level as your heart. (Fig. A.)

Note: The level of your heart is slightly below your armpit.

Relax your entire body, especially the area between your elbow and fingers.

	2. If the cuff is not at the same	Fig. B
	level as your heart or if	Fig. B
	level as your heart or if
	you can not keep your arm
	completely still throughout the
	reading, use a soft object such
	as a folded towel to support
	your arm. (Fig. B) Do not
	allow hard objects to come in
	contact with the wrist cuff.

A. Plug the AC/DC adapter (6V 500mA), into the jack located at the bottom of this

unit. (shown in the diagram).

B. Use only the adapter included with this unit.

Note: Remove batteries when using the AC adapter for an extended period of time.

3.Turn your palm upwards.

4.Sit upright in a chair, and take 5-6 deep breaths.

Avoid leaning back or crossing your legs while the measurement is being taken. (Fig. C)