Lumiscope 1134 user manual WHO Lighted Indicator, To start the measurement

14 Measurement Procedures

To start the measurement

Note: In order to get your correct measurement result and to avoid erroneous measurements you should be seated quietly, your arm, hand, and fingers should be still during measurement procedure.

A. Push the "PAGE" button to select one of the four Memory Zones. Then push "POWER" twice. It will then display a "FLASHING 0". After a few moments the unit will automatically inflate displaying the increasing pressure reading.

ON/OFF

Memory

Zone Power

Flashing 0	Pressure
	Reading

B. After the unit reaches its desired pressure, the cuff will slowly deflate. During deflation, the unit will beep. Once the cuff has been fully deflated, your blood pressure measurement will be displayed on the LCD screen.

Maximum Pressure	Pressure	Blood Pressure
Reading	Deflating	Reading

WHO Lighted Indicator 15

Showing levels of Blood Pressure Reading

Standards for assessing high blood pressure, without regard to age, have been established by the World Health Organization (WHO), as shown in the chart as below. This unit offers 6-color light signs after user's measuring. From the light sign, it will help users to find out their health situation. Different levels show the corresponding light color.

Example: If your Blood
Pressure reading is
122/75, then light sign
will indicate the color
Blue Green which means
your reading is Normal	Blood Pressure	Light Sign
	Reading	Indicator

• Optimal – Blue			• Grade 1 Hypertension — Purple
• Normal – Sky Blue			• Grade 2 Hypertension — Yellow
• High-Normal – Green			• Grade 3 Hypertension — Red
		Grade 3 hypertenslon (severe)						(Red)
mmHg	180	Grade 2 hypertenslon (moderate)
							(Yellow)
Pressure	160					(Purple)
		Grade 1 hypertenslon (mlld)
Systolic	140	Hlgh-normal	(Green)
	130	Normal
	120	(Sky Blue)
		Optlmal (Blue)
		80	85		90		100	110
				Diastolic Pressure mmHg