Lumiscope 6700 user manual With the Optional Rechargeable Battery

With the Optional Rechargeable Battery

One can also use the optional Ni-MH rechargeable battery for the power input. It provides approximately 80 minutes of operation.

To install the battery: Match the device bottom to the battery top as shown at near right. Slide until you hear it click into place.

To remove the battery: Push down on the battery lock as shown at far right and slide the battery out from beneath the device.

Battery Installation Battery Removal

To recharge the battery: Insert the AC/DC adapter into the device's power socket. An orange light indicates the battery is being recharged. The orange light will de-illuminate when charging is complete. The minimum recharge time is 5~6 hours.

Note: The first charge of a new rechargeable battery will require at least 8 hours.

Battery Recharging

11.. .

6700-INS-LAB-RevA08.indd 11 1/27/09 4:58 PM