from 0°F to 9°F degrees (0°C to 5°C degrees). When set to 0 degrees, the second heating stage is completely disabled while in regular Heat mode (Emergency Heat mode will still function for heat pump configurations). The Offset value will determine the number of degrees from the set point that will be required for the second heating stage to turn on. This setting can be used to conserve energy in situations where the second heating stage is more costly to operate when compared to the first stage.
71 |
|
| 70˚F Set |
|
| ||
|
|
| |
|
|
| |
70 |
|
| Temperature |
|
|
| |
69 |
|
| Swing |
|
| ||
|
| ||
|
|
| Setting= |
68 |
|
| #2 (+/- 0.5˚F) |
|
|
| |
|
|
| |
67 |
|
|
|
|
|
| |
|
|
| |
66 |
|
|
|
|
|
|
65 DEGREES (F)
(1st Stage)
Offset ** Setting= 4˚F degrees
(2nd Stage) **
Cut-In / Cut-Out
**= Only applies if a second heat stage is present
25
