Lynx D AD 3220 B manual Electrical Installation, Stand Alone Operation

Reference Manual D AD 3220 B Version 1.0

Electrical Installation.

Stand Alone Operation

The MiniModule requires the R PS 3001 power brick option for stand-alone operation. Two versions are available R PS 30001 E for European markets and R PS 30001 U for the US markets. Please ensure you have the correct power option for your region. The connection to the module is made with a small 5- pin connector, which has a twist bayonet securing system. Please make sure the connection is solid and locked in place. A strain relief is included within the module to prevent excessive strain on the connection.

Signal connections should be made with care, please ensure connections are correct and compatible equipment is feeding / receiving the signals from the module or damage can result.

!

!

Caution. Only use the optional LYNX R PS 3001 power modules. Please make sure the brick is not connected to the main supply when making the DC power connection to the module. Ensure the 5- pin power connector is locked securely in place.

Caution. Care needs to be taken when using the module in this way, if it is not physically secured. Keep the module away from the floor to avoid the risk of someone stepping or tripping on the unit, and locate the unit away from excessive sources of heat and any sources or moisture.

Page 14