M&S Systems dmc3-4/dmc1 owner manual SCAn1, Audio Settings, Volume, Tone

dmc3-4

To set the Scan Mode:

1.To change the scan mode, simultaneously press and release PRESET and SOURCE again. The display shows either Scan1 or Scan2.

Note: Exit out of scan mode by pressing PRESET and SOURCE or waiting for the display to show the clock time again.

AUTO	SCAn1		POWER
			TONE
TIME
PRESET			SOURCE
∧			∧
TUNE	LISTEN	TALK	VOLUME
∨	DOOR TALK		∨

PRESET + SOURCE

Change Scan mode.

Figure 5—Scan Mode

Audio Settings

Volume

•Music—Adjusts the volume for system music

•Master Station—Adjusts the volume for the speaker on the Master Station only

•Intercom—Adjusts the volume for the system intercom

Tone

•Loudness

•Treble

•Bass

•Balance (if you have the optional stereo power amplifier)

www.mssystems.com 800.421.1587 7