RF Remote Control (Optional)
Up to 4 different remotes can be programmed to control the Master Station. The system obtains a unique code from the remote, virtually insuring that no one else can interfere with your system and you will not interfere with anyone else.
To program the RF remote:
1.Simultaneously press and release AUTO and SOURCE. RF and SET appear on the display.
2.Press and hold any button on the remote until the RF and SET disappear from the display. The remote is now ready to use.
Note: To cancel programming of remote, press and release AUTO and SOURCE.
The remote is an RF (radio frequency) remote control, which means that you can use it from any location in the house. You do not have to be in the same room as the Master Station.
| Tune Up |
| |
Tune Down | Scan radio stations when AM or FM are |
Scan radio stations when AM or FM are | selected as audio source. Scan mode is set |
selected as audio source. Scan mode is set | at Master Station. |
at Master Station. |
|
|
|
Volume Up
Press and hold to turn on System Music.
Press to adjust System Music volume.
Volume Down
Press and hold to turn off System Music.
Press to adjust System Music volume.
Source
Select audio
source: AUX, AM, FM, CD
Figure
Note: If 4 remotes have previously been programmed and a replacement remote (due to breakage or loss) is ordered, all 4 remotes will need to be reprogrammed.
www.mssystems.com 800.421.1587 | 17 |
