TROUBLESHOOTING TIPS
PROBLEM | WHAT TO CHECK | |
Chime does not ring or is | Speaker volume controls have been turned down. | |
not loud enough. |
| |
|
| |
| Check to see if speaker is in monitor mode. | |
|
| |
| Chime volume needs to be adjusted (see Setting Up | |
| Your System). | |
|
| |
Feedback or squeal is heard | System volume has been set too high. | |
when communicating. |
| |
|
| |
Intercom communication is | Speaker volume controls have been turned down. | |
not loud enough. |
| |
System volume is set too low. | ||
| ||
|
| |
Music volume is too loud | Speaker volume controls have been turned down. | |
or soft. |
| |
System volume is set too low. | ||
| ||
|
| |
| Music volume needs to be adjusted (see Setting Up | |
| Your System). | |
|
| |
Can’t MONITOR or | Remote station to be monitored does not have the | |
MONITOR is not loud | MONITOR button pressed in. | |
enough. |
| |
Speaker volume control on the monitored station is | ||
| ||
| set too low. | |
|
| |
| Speaker volume control turned down at stations to hear | |
| the monitored station(s). | |
|
| |
| All stations and the master are in the MONITOR | |
| position. At least one station must NOT be in the | |
| MONITOR position to be able to hear the monitored | |
| stations. | |
|
|
8
