SETTING UP YOUR SYSTEM

System Volume Control - This control is located only on the master speaker. The normal range is between 12 and 1 o’clock.

Speaker Volume Control - The normal setting for speaker volume control knobs is the maximum clockwise position. Speaker volume controls should only be turned down to make a particular room quieter than others.

Chime Volume - Chime volume was set during installation but may be changed if necessary. Before changing the chime volume, be sure all speaker volume controls are at their maximum positions when you test the volume level. To adjust the chime volume, remove the master speaker from the wall and turn the chime volume control on the back with a small flat-bladed screwdriver.

Music Volume - Music volume can be controlled by the system volume control. However, the system volume control also affects the intercom communications volume level. A separate volume control for the music is contained inside the master speaker. This can be adjusted for softer background music while still maintaining intercom communications at the desired level. Be sure all speaker volume controls are at the maximum and the system volume has been set to the desired level before adjusting the music volume. To adjust the music volume, carefully remove the monitor button (door release on MC111DM) and adjust the volume using a small flat-bladed screwdriver.

MUSIC LEVEL

MUSIC LEVEL

 

Remove MONITOR button to reveal

MUSIC level adjustment.

Use a small flat-bladed screwdriver to adjust MUSIC level.

6

Page 8
Image 8
M&S Systems MC111M, MC111DM manual Setting UP Your System, Music Level