M-Audio 1010-AI warranty Introduction, Features, What’s in the Box?

Introduction

Congratulations on your purchase of the Delta 1010 ADAT Interface, designed and manufactured by M Audio. The Delta 1010-AIis a companion to the Delta 1010 PCI Recording System, and when used together, the Delta 1010-AIwill add ADAT Optical 8-channel input and output capability to your Delta 1010.

Please follow the instructions contained in this manual to properly connect the Delta 1010-AIto your existing Delta 1010 setup, and to completely understand the versatility of the Delta 1010-AI. If you have not yet installed your Delta 1010, please refer to the Delta 1010 manual to install and configure the Delta 1010’s PCI card.

Features

•ADAT* I/O for PC(Windows 95/98, NT, Linux) and Apple (MacOS) computers operating up to a full 24 bit 48kHz.

•Provides ADAT record through and playback using premium 24 bit converters.

•Simultaneous ADAT recording and computer playback.

•Select between analog and ADAT optical for computer input.

•Select between computer out and ADAT in for routing to the Delta 1010 D/A section.

•Select between computer out and analog in for ADAT input source.

•ADAT In to ADAT Out “Thru” mode.

* ADAT is a registered trademark of Alesis.

What’s in the Box?

Contained in the Delta 1010-AIpackage, you should find the following:

•This manual.

•Delta 1010 ADAT Interface Module for the Delta 1010.

•25-pin male to female standard printer cable.

•9v DC 500 mA center positive power supply.

2