M-Audio AV40 Acoustic/Traction Pads, Speaker Wire Connections, Setting the Bass Boost EQ Switch

4Studiophile AV 40 User Guide

Acoustic/Traction Pads

In order to minimize vibrations and maximize physical stability, we recommend you use the provided acoustic/traction pads on the bottoms of the Studiophile AV 40 monitors.

Speaker Wire

Connections 1

Use the transparent tinned bare wire cable included in the Studiophile AV 40 package to connect the Left and Right speakers via the red /black spring-clip terminals on the back of each speaker.

Connecting to a Computer Sound Card or Other Audio Output Device 2

Before connecting the Studiophile AV 40 monitors, make sure the power from the computer or other output device has been turned off and the Studiophile AV 40 system is also turned off.

Connect the 1/4" or RCA input jacks to the corresponding output connectors of a computer sound card, portable music player, etc. You can also use the black 1/8" stereo mini cable to connect a secondary audio device to the “Aux” input on the front of the Studiophile AV 40.

Setting the “Bass Boost” EQ Switch 3

This 2-position switch provides a subtle increase in bass response. The On mode increases the low-frequency gain slightly via the woofer and bass-reflex port. The Off mode produces a natural, even response for most listening conditions.

Please see Appendix C for the “Bass Boost” frequency response curve.

1

2

3