M-Audio AV40 Installation, Stereo Auxiliary Input and Headphone Output, Network & Power Amplifiers

6.Stereo Auxiliary Input and Headphone Output

For maximum flexibility, we have included a stereo “Aux” input which allows you to plug in a secondary audio source (such as your portable music player) in addition to the main RCA and 1/4" TRS inputs in the back. The volume control works on all inputs simultaneously. Additionally, there is a stereo headphone output next to the “Aux” jack that mutes the sound coming out of the speakers and redirects it to your headphones.

Studiophile AV 40 User Guide 3

7.Network & Power Amplifiers

The power amplifiers and crossover network, for the Studiophile AV 40 are specially designed for this woofer and tweeter. The network distributes low-, mid-, and high-frequency audio signals to the proper components in order to minimize distortion and to achieve a balanced sound.

Installation

English

Français

4

For optimal performance of the Studiophile AV 40, please read the following directions carefully before installation.

Precautions

Connections: Your Studiophile AV 40 monitors have a variety of inputs for use with a multitude of devices. Soundcards or other devices with RCA line outputs (e.g., M-Audio Delta Audiophile 24/96) can be connected to the RCA inputs on your left speaker’s back panel. Professional audio devices with balanced or unbalanced 1/4” outputs should be connected to the 1/4” TRS back panel inputs. If your soundcard or portable music player has an 1/8” output, you can connect it to the front panel aux input, using the provided 1/8” to 1/8” cable.

Deutsch

Español

Correct Power Operation: Since the Studiophile AV 40 contains amplifiers, it must be connected to a power outlet using the detachable AC cable that is provided. Before connecting power, please make sure that the On/Off switch on the back of the Studiophile AV 40 is set to the off position.

WARNING! - Use of improper voltage may result in hazardous conditions and/or damage to speaker components not covered by speaker warranty. Please make sure the voltage is set appropriately by checking the the position of the red "AC Select" switch on the back before powering on your speakers.

Italiano

日本語