M-Audio manual Specifications, DMP3 User Guide, after handling

Specifications

Maximum Input:	+10 dBv
Maximum Output - Balanced:	+22 dBv
Maximum Output - Unbalanced:	+16 dBv
Headroom:	22 dB
Meter headroom:	12 dB
Meter level:	0 VU @ +12dBV, 1KHz
Maximum Gain - Mic/Instr. In:	66 dB
Gain Range:	13dB to 73dB
Clip Indicator:	3 dB below threshold of clipping
Low Cut Filter Cutoff:	3 dB down @ 72 Hz
Low Cut Filter Slope:	18 dB/Octave
Input Impedance (1 kHz) - Mic In:	3 kOhms
Input Impedance (1 kHz) - Instr. In:	100 kOhms
Noise Factor:	< 1.5dB @ maximum gain
Signal to noise:	115dB “A” weighted @ minimum gain
THD:	0.02% @ minimum gain (THD is below
	noise floor at most higher gain settings)
Frequency response:	20Hz to 80KHz; +0; -1 dB
Weight:	Under l lb.
Power Supply:	9vAC 1Amp supply w/2.5mm plug.
Output Impedance:	500 Ohms.

WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands

after handling.

DMP3

Tested to comply with

FCC standards

FOR HOME OR STUDIO USE

© 2008 Avid Technology, Inc. All rights reserved. Product features, specifications, system requirements and availability are subject to change without notice. Avid, M-Audio and DMP3 are either trademarks or registered trademarks of Avid Technology, Inc. All other trademarks contained herein are the property of their respective owners.

8 DMP3 User Guide